Oscillographic recorder DL950

In order to achieve a low-carbon society, eliminate the demand for fossil fuels and achieve the global goal of sustainable development of the United Nations, it is urgent to develop new energy-saving technologies for renewable energy, transportation and household and industrial appliances. To minimize energy losses and optimize design efficiency, engineers need to understand the electrical and mechanical behavior of products in detail. The DL950 oscilloscope recorder captures and analyzes a wide range of electronic, physical sensor signals and serial buses. It is a unique combination of high sampling rates to view details while recording for a long time. The DL950 will be one of the most valuable instruments in user labs.

Features
200 MS/s high-speed sampling rate 10GE high-speed data transmission
The DL 950 can capture any abnormal signal at a sampling rate of up to 200 MS/s. With 10Gbps ultra-high-speed optical Ethernet communication, even large volumes of data can be quickly transferred to a PC.

Isolated plug modules, multi-unit synchronization
A variety of plug-in modules can be used to isolate voltage, temperature, acceleration, strain measurements, etc. Supports simultaneous measurement of up to 160 channels.

Touch screen, application menu
12.1 inch large size touch screen, intuitive operation. Newly designed app menu, wizard-style settings for frequently used apps.

In-Vehicle Serial Bus Analysis
Displays trending waveforms of data messages such as voltage, temperature and other parameters from on-board serial buses such as CAN FD, CAN, LIN and SENT.

High Speed DAQ & Ultra Long Storage Oscilloscope
New high-speed modules and 10Gbps Ethernet
200 MS/s 14-Bit Insulation Module
Accurately capture the switching waveform of the inverter and the high-frequency interference noise around the power supply.
• Up to 1000V insulated input
• ADC Resolution 14-Bit
• 40MHz Wideband
• Up to 20 seconds of continuous acquisition

10GE data transfer (/C60 option)
With 10Gbps Ethernet, data up to 20 MS/s can be stored on a PC in real time. SFP modules, fiber optic lines and PC software IS8000 can be used for data transmission.

Function
Real-time math (/G03 or/G05 option)
Various calculations are performed on the captured signal, and the results are displayed on the screen in real time. It can perform triggering, automatic waveform parameter measurement and cursor measurement. Independent input channels, which can simultaneously display and analyze the real-time calculation results of 32 input channels and 16 real-time operation channels.

Historical function
Any anomalies that occur during repeated waveform measurements disappear before they are noticed. Since the DL950 stores up to 5000 waveforms (historical waveforms) in the acquisition memory, abnormal waveforms can be played back and displayed.

Action on trigger and GO/NO-GO judgment
When a trigger occurs, this function performs a number of pre-specified actions, such as saving a data file, buzzer, and email transmission. Further, a pass or fail (GO/NO-GO) decision may be performed based on a waveform parameter such as a waveform shape or amplitude, and an action may be performed according to the decision result.

High noise immunity
The DL950 is designed to be noise-resistant and can measure waveforms correctly even when placed close to the inverter. If the touch panel fails, just turn off the touch panel and use the keys and knobs to operate.

Other functions
• Logger mode (set recording time and sampling interval)
• Current probe up to 8 power supplies (/P8 option)
• Use USB mouse, keyboard and external printer