MultiSafe HS 11 11kV AC/16kV DC two-pole high-voltage tester

The MultiSafe DSP HS11 is a two-pole high-voltage tester with a safety LED display signal that accurately displays the voltage value.
The MultiSafe HS 11 is a compact two-pole voltage tester suitable for AC voltages up to 11 kV and DC voltages up to 16 kV. It is especially suitable for fast and reliable detection of the voltage between the capacitor bank and the DC bus of the converter, as well as the feed from the traffic system.

Characteristics
• Accurate display of up to 11V AC/16V DC voltage
• Glass-reinforced plastic tube with internal protection resistor for high degree of safety
• Impulse voltage intensity> 250 kV
• Self test, check protection resistance and function

We will find the right solution for you
Are you looking for a measuring instrument for a special application?
Our services:
We are more than willing to advise you on specific issues and provide customized solutions.
Our team of experts and many years of experience is our strength and resilience, even in small instruments. We look forward to meeting new challenges.
Waiting for you at any time
Specific applications place special demands on measuring test instruments.
We would be happy to support you in developing joint solutions for specific applications.
Repeat inspection and calibration
For voltage tester exceeding 1kV, repeat check
The inspection time limit does not exceed 6 years, which also applies to voltage testers up to 1000V.
Depending on the field of application and the needs of the measuring test instrument, repeated checks or repeated calibrations can be carried out within a shorter period of time.
Repair
We set high requirements for our measuring and testing instruments and always carry out quality control.
The most modern electronics and high-quality materials guarantee a long service life.
If the tester is damaged or malfunctions, we can repair it quickly.

Advantages
Robust Design
High-quality components ensure functional application and safety under extreme conditions:
• Impact resistant plastic housing and drop resistant display housing
• Dust and water resistance (degree of protection: IP 65, proven for outdoor operation)
• Additional mechanical protection using double insulated polyurethane control cable and corrugated pipe
• The high-voltage test probe is made of a glass-fiber reinforced plastic tube equipped with a ten-way molded resistor
Security
• Molded protection resistor, tested impulse voltage strength> 250kV
• Integrated self-test for detection of protection resistance, function and grounding. (for HS11M/ HA11UK)
• Redundate test system continuously monitors no voltage.
Three major display systems
• LED red represents voltage, green represents standby and no voltage status
• Display voltage value, frequency, voltage type and polarity
• Voltage> Ut = 5OV audible alarm
Simple operation
• Simple operation due to one-key control. The result can be clearly displayed on the LED screen of the display.